Nastavení cookies
Obrázek 350x25032

Design and delivery of RCO unit

As part of our long-term cooperation with ELVAC EKOTECHNIKA, we have designed and delivered the mechanical component of an RCO unit, which will serve to remove volatile organic compounds (VOCs) from its emissions.

Obrázek 350x25031

Static calculation for steel structure to support cooling units

In mid-April, we provided our customer, HA.EM, with a static calculation for a steel structure that will support cooling units on the grounds of the pharmaceutical company TEVA Czech Republic.

Obrázek 350x25030

Teplarna Trmice - Documentation for implementation of high-pressure steam pipelines

At the end of February, we completed documentation for the implementation of high-pressure steam pipes on the K6 boiler at the Trmice Heating Plant in the Czech Republic, which is operated by CEZ.

Obrázek 350x25029

Feasibility study for adding LPG to existing fuel base

At the end of 2022, we submitted a feasibility study addressing supplementation of LPG to an existing fuel base at the site of a leading aerosol can manufacturer.

Obrázek 350x25028

Documentation for boiler modifications that allow for biomass combustion

In July, our designers delivered final project documentation to PBS Brno for realization of the investment project “Boiler modifications to allow for biomass combustion at the Veolia Energie Kolin power plant”.

Obrázek 350x25027

Static calculation of turntable castings

In mid-May, we handed over a static calculation of a turntable with a diameter of 4.45 m to our customer, KOFING. The turntable replaces crates for the transport of spouts and inlets.

Obrázek 350x25026

Flexibility analysis of steam pipelines for CEZ Prunerov Power Plant (EPR II)

We prepared a flexibility analysis of superheated steam pipelines at the EPR II power plant units for our client CEZ Energetické produkty. The purpose of the analysis was to verify the settings of individual spring hangers, including recommended measures for bringing them into their working areas.

Obrázek 350x25025

Worshop documentation for steel structures

For our customer PROMUS Katowice, we've prepared workshop documentation for the production of steel footbridges and platforms that will be installed at the Skoda Auto factory in Mlada Boleslav, Czech Republic.

Obrázek 350x25024
Assembly documentation for high-pressure piping
We delivered assembly documentation for a heat recovery boiler project that our customer Hutni Montaze carried out for a foreign investor. The scope of our work included the routing, positioning and connection of high-pressure pipelines to steel structures.
Obrázek 350x25023
Assessment of flue gas boiler

We were contracted by our client CS Cabot to assess problems they were experiencing with a flue gas boiler, which has a heat output of 8.25 MW. The heated flue gases utilized by the boiler come from the production of soot.

Obrázek 350x25022

Veolia Energie - Documentation for 2 x 20 MW hot water gas boiler room

Documentation for a joint zoning and building permit for a hot water gas boiler room with a 2 x 20 MW input in the Veolia power plant complex in Trebovice.

Obrázek 350x25021
Project documentation for steam pipeline at the TAMEH heating plant
In connection with a modernization project for energy operations at the TAMEH heating plant, IVITAS delivered project documentation for implementing the connection of an output steam pipeline from the No. 3 to No. 2 high-pressure steam distributor.
Obrázek 350x25020

Reconstruction of Hot Reheat Pipework for GE POWER in Great Britain

For our client, GE POWER, we delivered detailed engineering documentation for steam, unloading and drain piping of three boilers in a power plant in Great Britain.

Obrázek 350x25019

Delivery of an RCO unit

For our customer ELVAC EKOTECHNIKA s.r.o., we designed and delivered the mechanical section of an RCO unit (regenerative catalytic oxidizer), which serves to remove volatile organic compounds (VOC) from exhaust gases. This technology achieves a cleaning efficiency of over 99% and was installed during the last few days of October for the end customer in Slovakia.

Obrázek 350x25017

Duct design workshop documentation for SUMITOMO SHI FW

IVITAS designers delivered workshop documentation of air- and flue-gas ducts to SUMITOMO SHI FW. The ducts will be manufactured in accordance with our documentation and be part of a SUMITOMO SHI FW FBC CFB boiler project realized for their end customer in Austria.

Obrázek 350x25016

Design of Coke Gas Steam Heater for ARCELORMITTAL / TOPLANA ZENICA

ARCELORMITTAL (www.arcelormittal.com) once again put their trust in the know-how and extensive technical capabilities of IVITAS for the design, production, delivery and commissioning of a new autonomous coke gas steam heater for a new Gas Boilers project through JV – TOPLANA ZENICA (www.zenica.arcelormittal.com).

Obrázek 350x25015

Building permit documentation for installation of a CHP and gas boiler

We've prepared project documentation for our long-term business partner KOMTERM, regarding the issuance of a building permit for the installation of a CHP unit (output of 200 kWe) and gas boiler in their current boiler room in the Czech city of Doksy.

Obrázek 350x25014
Design and delivery of high-temperature spring hangers
High-temperature spring hangers designed and delivered by IVITAS for the PRUNEROV II power plant, which is operated by the largest power generation group in the Czech Republic - CEZ .
Obrázek 350x25010
Natural gas connection study for TAMEH Czech
We have prepared documentation for our client TAMEH Czech s.r.o, regarding all-profession project implementation in the reconstruction of a K4 gas boiler to allow for the combustion of natural gas. The boiler, which is at a TAMEH Czech operated heating unit within the Liberty Ostrava, a.s. steel plant, is currently fueled with blast furnace and coke oven gas. The addition of natural gas as a fuel for the boiler, based on IVITAS project documentation, will ensure that emission limits (valid from 2021) are met for its combined combustion gas output.
Obrázek 350x2509
Detail design of pipes in the turbine house
Detail design documentation of pipes including strength and stress calculations.
Obrázek 350x2507
Design of two-chamber flue gas heat exchanger
 
IVITAS provided workshop documentation for a two-chamber heat exchanger to heat combustion gas and air utilizing blast furnace flue gas. Our static calculation and optimization of the heat exchanger steel structure design respect the highest working temperature of flue gases (400 °C for up to 15 min.) and operating temperature of the blast furnace gas (240 °C max. at the highest working overpressure of 20 kPa).
Obrázek 350x25012
Project documentation for a waste crushing line hall
IVITAS provided project documentation for the hall of a metal waste crushing line and an iron fraction sorting building. Both sets are part of the technological equipment for metal waste crushing in the Czech city of Vysoke Myto.
Obrázek 350x25011
Detail engineering – piping design
Pipeline detail engineering for a gas cooling system.
Obrázek 350x2505
Vent steam silencers
IVITAS carried out the design, manufacture and supply of three silencers for the new steam gas boiler room at OP PAPIRNA (member of DELFORT INTERNATIONAL) in the Czech city of Olsany.
Obrázek 350x2508
Gas boiler-rooms (project documentation)
Project documentation was provided by IVITAS for the issuance of a building permit, engineering and processing of all-cost project documentation for the construction of two gas boiler rooms in the premises of IVECO Czech Republic in the Czech city of Vysoke Myto.